Copy head (r256279) to stable/10 as part of the 10.0-RELEASE cycle.

Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation

Use si_drv1 to store joy(4)'s softc.

There are still some calls to dev2unit() left, but I guess we should
take care of those another time.

Replace all calls to minor() with dev2unit().

After I removed all the unit2minor()/minor2unit() calls from the kernel
yesterday, I realised calling minor() everywhere is quite confusing.
Character devices now only have the ability to store a unit number, not
a minor number. Remove the confusion by using dev2unit() everywhere.

This commit could also be considered as a bug fix. A lot of drivers call
minor(), while they should actually be calling dev2unit(). In -CURRENT
this isn't a problem, but it turns out we never had any problem reports
related to that issue in the past. I suspect not many people connect
more than 256 pieces of the same hardware.

Reviewed by: kib

Unbreak second joystick (joy1) support.

PR: kern/46734
Submitted by: Richard Airlie <richard@darq.net>
Approved by: netchild

Remove OLDCARD support by removing compat shims

Do the dreaded s/dev_t/struct cdev */
Bump __FreeBSD_version accordingly.

Fix disordering of pccarddevs.h noticed by bde. Also remove a few
redundant includes and fix some of the include disordering.

Submitted by: bde

Move to generating pccarddevs.h on the fly, both for the kernel and
the modules.

Also generate usbdevs.h automatically now, but a non-kernel file is
stopping that at the moment.

Convert callers to the new bus_alloc_resource_any(9) API.

Submitted by: Mark Santcroos <marks@ripe.net>
Reviewed by: imp, dfr, bde

Device megapatch 4/6:

Introduce d_version field in struct cdevsw, this must always be
initialized to D_VERSION.

Flip sense of D_NOGIANT flag to D_NEEDGIANT, this involves removing
four D_NOGIANT flags and adding 145 D_NEEDGIANT flags.

Device megapatch 1/6:

Free approx 86 major numbers with a mostly automatically generated patch.

A number of strategic drivers have been left behind by caution, and a few
because they still (ab)use their major number.

Use __FBSDID().
Also some minor style cleanups.

Gigacommit to improve device-driver source compatibility between
branches:

Initialize struct cdevsw using C99 sparse initializtion and remove
all initializations to default values.

This patch is automatically generated and has been tested by compiling
LINT with all the fields in struct cdevsw in reverse order on alpha,
sparc64 and i386.

Approved by: re(scottl)

Fix typo in the BSD copyright: s/withough/without/

Spotted and suggested by: des
MFC after: 3 weeks

Check for defined(__i386__) instead of just defined(i386) since the compiler
will be updated to only define(__i386__) for ANSI cleanliness.

Revert change that breaks the joy module. joydevclass must not be static.

Staticise the joy devclass.

Split joystick driver into ISA and PC Card front ends.

Similar code was submitted in PR 5559 by Takeshi OHASHI-san, but the
PC Card system has changed much since then, so this is a fresh
implementation.

PR: i386/5559
Submitted by: Takeshi OHASHI

KSE Milestone 2
Note ALL MODULES MUST BE RECOMPILED
make the kernel aware that there are smaller units of scheduling than the
process. (but only allow one thread per process at this time).
This is functionally equivalent to teh previousl -current except
that there is a thread associated with each process.

Sorry john! (your next MFC will be a doosie!)

Reviewed by: peter@freebsd.org, dillon@freebsd.org

X-MFC after: ha ha ha ha

Correct the ID for the ALS0120 PnP Joystick. It is different from the
ALS0110.

PR: kern/22617
Submitted by: Mike Holling <myke@fks.bt>

Add ACPI attachments.

Send the remains (such as I have located) of "block major numbers" to
the bit-bucket.

Add ADS7182 as a known Joystick.

Recognize the CSC0101 ID for the Thinkpad series.

PR: 15633
Submitted by: gibbs

Removed unnecessary include files.

Make this kld'able (#include "joy.h" no longer required as there are no
references to NJOY any more after newbusification)

newbusify and port the joy driver to the Alpha. It now attaches to the
joystick port on PnP sound cards that have a suitable device ID on them.

Doug Rabson added timer code so it didn't have to beat on the isa timer.

Submitted by: Takanori Watanabe <takawata@shidahara1.planet.sci.kobe-u.ac.jp>

Oh foo. I got carried away. :-( "joy.h" is used to size an array.
(Incidently, there is no bounds checking...)

Zap unneeded #include (found by phk)
Remove useless #include "joy.h"; #if NJOY > 0 - this is always true
if it's being compiled. config arranges this.

Remove five now unused fields from struct cdevsw. They should never
have been there in the first place. A GENERIC kernel shrinks almost 1k.

Add a slightly different safetybelt under nostop for tty drivers.

Add some missing FreeBSD tags

Convert DEVFS hooks in (most) drivers to make_dev().

Diskslice/label code not yet handled.

Vinum, i4b, alpha, pc98 not dealt with (left to respective Maintainers)

Add the correct hook for devfs to kern_conf.c

The net result of this excercise is that a lot less files depends on DEVFS,
and devtoname() gets more sensible output in many cases.

A few drivers had minor additional cleanups performed relating to cdevsw
registration.

A few drivers don't register a cdevsw{} anymore, but only use make_dev().

Simplify cdevsw registration.

The cdevsw_add() function now finds the major number(s) in the
struct cdevsw passed to it. cdevsw_add_generic() is no longer
needed, cdevsw_add() does the same thing.

cdevsw_add() will print an message if the d_maj field looks bogus.

Remove nblkdev and nchrdev variables. Most places they were used
bogusly. Instead check a dev_t for validity by seeing if devsw()
or bdevsw() returns NULL.

Move bdevsw() and devsw() functions to kern/kern_conf.c

Bump __FreeBSD_version to 400006

This commit removes:
72 bogus makedev() calls
26 bogus SYSINIT functions

if_xe.c bogusly accessed cdevsw[], author/maintainer please fix.

I4b and vinum not changed. Patches emailed to authors. LINT
probably broken until they catch up.

This commit should be a extensive NO-OP:

Reformat and initialize correctly all "struct cdevsw".

Initialize the d_maj and d_bmaj fields.

The d_reset field was not removed, although it is never used.

I used a program to do most of this, so all the files now use the
same consistent format. Please keep it that way.

Vinum and i4b not modified, patches emailed to respective authors.

The joypart() macro had a precedence bug. Add seatbelts for UNIT() too.

s/static foo_devsw_installed = 0;/static int foo_devsw_installed;/.
(Edited automatically)

This commit fixes various 64bit portability problems required for
FreeBSD/alpha. The most significant item is to change the command
argument to ioctl functions from int to u_long. This change brings us
inline with various other BSD versions. Driver writers may like to
use (__FreeBSD_version == 300003) to detect this change.

The prototype FreeBSD/alpha machdep will follow in a couple of days
time.

Moved some #includes from <sys/param.h> nearer to where they are actually
used.

Make all file-system (MFS, FFS, NFS, LFS, DEVFS) related option new-style.

This introduce an xxxFS_BOOT for each of the rootable filesystems.
(Presently not required, but encouraged to allow a smooth move of option *FS
to opt_dontuse.h later.)

LFS is temporarily disabled, and will be re-enabled tomorrow.

Removed unused #includes.

Make MOD_* macros almost consistent:

Use the name argument almost the same in all LKM types. Maintain
the current behavior for the external (e.g., modstat) name for DEV,
EXEC, and MISC types being #name ## "_mod" and SYCALL and VFS only
#name. This is a candidate for change and I vote just the name without
the "_mod".

Change the DISPATCH macro to MOD_DISPATCH for consistency with the
other macros.

Add an LKM_ANON #define to eliminate the magic -1 and associated
signed/unsigned warnings.

Add MOD_PRIVATE to support wcd.c's poking around in the lkm structure.

Change source in tree to use the new interface.

Reviewed by: Bruce Evans

Updated #includes to 4.4Lite style.

Switched from using devfs_add_sw() to using devfs_add_swf()

Reviewed by: julian@freebsd.org

Fix the isa_device table (lkm): id_irq and id_maddr must be 0.
Pointed out by: bde

Add code to make it a loadable kernel module

Completed function declarations and/or added prototypes and/or added
#includes to get prototypes.

Staticize and cleanup.

Julian forgot to make the *devsw structures static.

Pass 3 of the great devsw changes
most devsw referenced functions are now static, as they are
in the same file as their devsw structure. I've also added DEVFS
support for nearly every device in the system, however
many of the devices have 'incorrect' names under DEVFS
because I couldn't quickly work out the correct naming conventions.
(but devfs won't be coming on line for a month or so anyhow so that doesn't
matter)

If you "OWN" a device which would normally have an entry in /dev
then search for the devfs_add_devsw() entries and munge to make them right..
check out similar devices to see what I might have done in them in you
can't see what's going on..
for a laugh compare conf.c conf.h defore and after... :)
I have not doen DEVFS entries for any DISKSLICE devices yet as that will be
a much more complicated job.. (pass 5 :)

pass 4 will be to make the devsw tables of type (cdevsw * )
rather than (cdevsw)
seems to work here..
complaints to the usual places.. :)

If you're going to mechanically replicate something in 50 files
it's best to not have a (compiles cleanly) typo in it! (sigh)

OK, that's it..
That's EVERY SINGLE driver that has an entry in conf.c..
my next trick will be to define cdevsw[] and bdevsw[]
as empty arrays and remove all those DAMNED defines as well..

Each of these drivers has a SYSINIT linker set entry
that comes in very early.. and asks teh driver to add it's own
entry to the two devsw[] tables.

some slight reworking of the commits from yesterday (added the SYSINIT
stuff and some usually wrong but token DEVFS entries to all these
devices.

BTW does anyone know where the 'ata' entries in conf.c actually reside?
seems we don't actually have a 'ataopen() etc...

If you want to add a new device in conf.c
please make sure I know
so I can keep it up to date too..

as before, this is all dependent on #if defined(JREMOD)
(and #ifdef DEVFS in parts)

the second set of changes in a move towards getting devices to be
totally dynamic.

this is only the devices in i386/isa
I'll do more tomorrow.
they're completely masked by #ifdef JREMOD at this stage...
the eventual aim is that every driver will do a SYSINIT
at startup BEFORE the probes, which will effectively
link it into the devsw tables etc.

If I'd thought about it more I'd have put that in in this set (damn)
The ioconf lines generated by config will also end up in the
device's own scope as well, so ioconf.c will eventually be gutted
the SYSINIT call to the driver will include a phase where the
driver links it's ioconf line into a chain of such. when this phase is done
then the user can modify them with the boot: -c
config menu if he wants, just like now..
config will put the config lines out in the .h file
(e.g. in aha.h will be the addresses for the aha driver to look.)
as I said this is a very small first step..
the aim of THIS set of edits is to not have to edit conf.c at all when
adding a new device.. the tabe will be a simple skeleton..

when this is done, it will allow other changes to be made,
all teh time still having a fully working kernel tree,
but the logical outcome is the complete REMOVAL of the devsw tables.

By the end of this, linked in drivers will be exactly the same as
run-time loaded drivers, except they JUST HAPPEN to already be linked
and present at startup..
the SYSINIT calls will be the equivalent of the "init" call
made to a newly loaded driver in every respect.

For this edit,
each of the files has the following code inserted into it:

obviously, tailored to suit..
----------------------somewhere at the top:
#ifdef JREMOD
#include <sys/conf.h>
#define CDEV_MAJOR 13
#define BDEV_MAJOR 4
static void sd_devsw_install();
#endif /*JREMOD */
---------------------somewhere that's run during bootup: EVENTUALLY a SYSINIT
#ifdef JREMOD
sd_devsw_install();
#endif /*JREMOD*/
-----------------------at the bottom:
#ifdef JREMOD
struct bdevsw sd_bdevsw =
{ sdopen, sdclose, sdstrategy, sdioctl, /*4*/
sddump, sdsize, 0 };

struct cdevsw sd_cdevsw =
{ sdopen, sdclose, rawread, rawwrite, /*13*/
sdioctl, nostop, nullreset, nodevtotty,/* sd */
seltrue, nommap, sdstrategy };

static sd_devsw_installed = 0;

static void sd_devsw_install()
{
dev_t descript;
if( ! sd_devsw_installed ) {
descript = makedev(CDEV_MAJOR,0);
cdevsw_add(&descript,&sd_cdevsw,NULL);
#if defined(BDEV_MAJOR)
descript = makedev(BDEV_MAJOR,0);
bdevsw_add(&descript,&sd_bdevsw,NULL);
#endif /*BDEV_MAJOR*/
sd_devsw_installed = 1;
}
}
#endif /* JREMOD */

Actually, 97 out of 304 devsw functions had benignly mismatched types.

Remove trailing whitespace.

Add and move declarations to fix all of the warnings from `gcc -Wimplicit'
(except in netccitt, netiso and netns) that I didn't notice when I fixed
"all" such warnings before.

Replace all remaining instances of `i386/include' by `machine' and fix
nearby #include inconsistencies.

Put the joystick status in a struct {int x, y, b1, b2;} rather than in a
dummy array of 4 integers. Declare the struct in the header file and update
the man page.

Add parentheses around macros!

Do not recompute TIMER0's maximum count, since it is in timer0_max_count.
Use a simpler formula to convert usecs to ticks.
Output is in microseconds instead of ticks, so that values do not depend
on the timer frequency.

Changed address of the game controller to 0x201 (was 0x200)
joy.c: joystick driver